My weather indicator weather underground6/18/2023 I decided to see how stable the connection was over 24 hours before doing any troubleshooting or enter the Weather Underground station ID. I relocated the display closer to the Wi-Fi router, but the Wi-Fi status indicator would still only intermittently show that it was connected to the strong Wi-Fi signal from my router. Pressing the Reset button on the outdoor station and the Sensor button on the display sync-ed up the units and the outdoor weather data was displayed within a few seconds. The manual does not say how long you have for synchronization to occur. That was probably because I waited too long to power on the display unit after installing the outside unit. The display had not connected to the outside station, even after 30 minutes had passed. However, the Wi-Fi status indicator rarely showed that the display was connected to the Wi-Fi network (showing a flashing Wi-Fi indicator instead of a steady indicator), although the display did get the correct local date, time, and forecast information and showed the NTP SYNC indicator. ![]() When the indoor sensor and display unit were powered on, I could connect my iPhone Safari web brower to the display Wi-Fi and configure it for my wireless network. Other display settings are adjusted using buttons on the back of the display. There are other advanced settings available on the configuration console, but most users will not need to change these settings. Once connected, you enter your Wi-Fi network and weather server account. ![]() I wonder how efficient it will be at generating power during the summer months at my Latitude of 32° when the station body will block the panel from the Sun.Ī web browser on a smart phone, tablet, or computer is used to connect to the display configuration console through Wi-Fi. Here is the Weather Station on my mast.Īs seen in the second photo above, the solar panel is mounted nearly vertically on the south side of the weather station. The station communicates with the display unit using 868/915/917 MHz RF transmission (450 feet specification range). The station can also be mounted on a flat surface using the supplied parts. I mounted the Weather Station on my existing mast (about 40' from the indoor display unit). You can download a copy of the manual at the Explore Scientific web site. The included manual (33 pages each in multiple languages) is excellent overall, with just a couple of items needing further clarification, and includes instructions for creating accounts on Weather Underground, Weathercloud, or almost any weather server to host your data. Included in the well-packaged box are the weather station, display, and mounting parts. Support for additional sensors (Thermo-Hygro Sensor, Floating Pool Sensor, Soil Sensor 7 each) Solar power extends battery life, drives ventilation fan inside the radiation shield The main features of the 7-n-1 Professional Weather Station are: Indoor and outdoor temperatureĪC power adapter for the display included (5 AA and 3 AAA backup batteries not included) I encourage everyone to watch these live streams or the replays). There are many events, extremely worthwhile in themselves, where Explore Scientific gift certicates are sometimes awarded to lucky viewers of the live streamed events. (The gift certificate I used was one that I had received as a result of watching one of the many Explore Alliance Live events. ![]() And finally, thanks to a gift certificate I had from Explore Scientific, the cost would be reduced. The excellent reputation of Explore Scientific was a significant factor. Its features, including the ease of connecting to Weather Underground, which I used with the Netatmo station, were a factor. ![]() I finally decided on the 7-in-1 WiFi Professional Weather Station with Weather Underground from Explore Scientific. Once the decision was made to get a new weather station, determining which one required a lot of research. I decided to replace the Netatmo with a different weather station. Although there were some nice features of the Netatmo Weather Station, not having a local display and not being able to see my data when the Netatmo server was not available were significant drawbacks. A connection to their server is required in order to see my local weather data as the Netatmo does not have a local display unit. Review - Explore Scientific 7-n-1 Professional Weather Stationįor several months my Netatmo Weather Station, purchased in February 2015, has been flakey, requiring frequent restarts in order for it to connect to the Netatmo server.
0 Comments
Leave a Reply. |